Product Image Zoom
Zoom
Overview
Allows you to connect 2 Dual LNBs (2 sats) into 8 satellite receivers. For use with FTA receivers.
Inventory Status: Not in Stock
Availability: None
2099
Earn iTokens on every dollar you spend.
| • | Provides signals from 2 satellites for up to 8 receivers |
| • | Use this device to hook up eight receivers to a two satellite dish (with 4 coax connections) or to two dual-LNB dishes where each dish is pointed at a separate satellite. |
| • | Territorial TV signal can be combined and conveyed by single coaxial cable |
| • | Powered by satellite receiver(s). |
| • | Passes power to satellite dish(es). |
| • | Built-in amplifier for DSS signals. |
| • | Does not "diplex" UHF/VHF signals. Add four diplexers at this unit and four more at the other end if diplexing is desired. |
| Number of Inputs | 6 Sat A LHCP, RHCP; Sat B LHCP, RHCP |
| Passband | 950-2150 MHz |
| Return Loss (in and out) | 12 dB |
| Gain (and slope) | -2, +2, +4 dB at 950, 1450, 2025 MHz |
| Isolation (cross pol and cross sat) | 40 dB |
| Maximum Input (16 channels) | -25 dBm per channel |
| Minimum Input | -50 dBm per channel |
| Current from IRD (at 18V) | 60 mA |
| Satellite Selection (Sat A) | 0 KHz |
| Satellite Selection (Sat B) | 22 KHz |
| Tone Blocking (IRD to LNB) | Yes |
| Polarization Selection | 13/18 V RHCP/LHCP |
| Power Pass (max) | 300 mA to selected LNB only, diode steered |
| Thru Voltage Drop | 0.6 V |